Pull Force Required to Pull Q Magnet Models from Metal Plate
The pull force of a magnet is the amount of perpendicular force needed to remove it from an object it is magnetically attracted to. In this case we used an industrial force guage and a large piece of iron around 25mm or 1″ thick so it would not become magnetically saturated – see the image below for a demonstration.
The magnetic pull force is a measure of how strong its magnetic field is and the properties of what it is attached to.
The following table provides the pull forces for each of the Q Magnet models.
Units are Newton (N), Kilogram Force (kgf), Pound Force (lbf).
| Q MAGNET MODEL | NEWTON | KGF | LBF |
| OF50-3 | Pending | ||
| QF28-6 | 262 | 26.7 | 59.0 |
| QF28-3 | 206 | 21.0 | 46.4 |
| HF28-6 | Pending | ||
| QF20-5 | 140 | 14.3 | 31.5 |
| QF20-4 | 132 | 13.4 | 29.6 |
| QF20-3 | 127 | 12.9 | 28.5 |
| QF20-2 | 90 | 9.18 | 20.2 |
| QF15-3 | 48 | 4.9 | 10.8 |
| QF15-2 | 50 | 5.1 | 11.3 |
| QF10-3 | 13.6 | 1.4 | 3.1 |
| QF10-2 | 11 | 1.1 | 2.5 |
| Q6-1.5 | 4.4 | 0.4 | 1.0 |
Image showing force gauge instrument to measure pull force.
Got Q Magnets ?
Since 2009, Q Magnets have led the way with the world’s most effective magnetic therapy devices. We provide a 30-day satisfaction guarantee and deliver worldwide.
We are dedicated to support our products with sound advice from experienced health professionals to achieve the best results!